Questions & Answers for: ps3 controller is dead Computers & Internet

ps3 controller not working hey my ps3 controller isnt working and it wont turn on ive tried charging it but it just wont work so i was hopeing you would tell me whats wrong with it your LI ion battery

...PS3 with a sixaxis controller - wirelessly - that appeared dead too. On connecting to the PS3 all four lights flashed repeatedly, I pressed the PS button and it registered as controller 1. when ...

...ps3 isnt even a year old and the controller is dead, it wont turn on even when conncected to the cable try it with another controller if that doesent work then the ps3 is broken if it does then take ...

...it on the other day and everything worked fine, but now I turn it on and the red light on the little box that plugs into the ps3 wont even turn on anymore? the controler is dead, try to buy a new

...PS3 controller is actually on. You can turn on the controller by pressing the Playstation button in the center of the controller. There will be a red light on top of the controller indicating that it ...

...usb device has been connected" when the system starts. Controller also has to be wired to the ps3 for it to work. any ideas??? yes! because maybe your os3 controller batteries are dead get a new ...

ps3 put usb cord in port reset controller nothing by usb port there amber light flicking just a bit then nothing whats strange both sony dualshock went dead with 1 hr of each other tried new usb cords

ps3 controller not charging The internal battery may be dead, or the power port may be broken. A replacement controller is most likely the answer. Maybe your controller dead or maybe your cable dead u

...usb cable on your ps3 controller if you have one. hi 1 you have to check if your cable is able to charge it in other console or other controller,if it works it means that the controller battery is ...

...plugged into the PS3 for initial use. Are the red LED lights flashing/lit. If not the battery may be dead. Can you borrow a friend's controller to make sure the controller ports are working