Notify python auto electronics / install shop http://www.pythoncarsecurity.com/Support/OwnersGuide.aspx
Testimonial: "thank you ,but iys not the same type ,not working"
the site i gave you has all models pick yours and also contact number for assistance
thank you john h , finally I did found the problem ,thank you for your assistance
manage to find how to run a test , and the result is "hood shutdown" which I think its the pin under the hood ,I did notice that it is broken ,I will buy one tomorrow ,replace it and tell you my result
×
SOURCE: i lost the Python 474P manuel and need to reprogram my control
remote wont lock dooors on 88 gmc sierra
SOURCE: How to reprogram Python 4Button Remote 474P ?
I had the exact same thing happen with my 4-button 474p remote. WITHOUT REMOTE START the correct sequence is:
1. Enter car - Leave door open.
2. Turn key to "on" position.
3. Within 5 (five) seconds press the Valet button 7 times then hold down. (Programs to channel 7)
4. Watch alarm light - It should now flash 7 times.
5. While still holding down the Valet button - Press the "lock" button on the remote and release. Should get a "chirp"
6. Now release and repress the Valet button once, holding down. You'll get the "chirp". Release Valet button.
7. Turn key "off". Exit vehicle and test remote. All 4 buttons should now work.
421 views
Usually answered in minutes!
×