Oc Plotwave 300 Developer - Answered Questions & Fixed issues
I have an Oce Plotwave 300 giving 22529 errors. Have replaced the spider board and usb cables. Any suggestions ?
Clean the paper tray, rollers, and clear any jams. The OCE Plotwave, being a large scale printer (used for posters and the like) is prone to jams and gumming up of the rollers. The error occurs when the paper doesn't move along properly and the sensors that read the surface and adjust the paper can't get it to adjust. Other issues can cause the same generic error. This includes incorrect PIN settings on the mainboard (some of these printers have PIN controllers that determine if it will read a certain way). It could be a read/write error in the USB control board (check to make sure all ribbons are correctly seated and all connections are making proper contact and are in the right ports). I suggest trying the OCE cleaning tool to see if that helps.
Oc PlotWave 300.
Flashing orange lights and it's saying F-05
"F-05" with flashing orange lights is used by many different appliances, so I need the brand and model to identify the fault correctly.
Please send:
Brand
Full model number
What type of machine it is (washer, boiler, coffee machine, etc.)
A photo of the display/lights would help too.
Ricoh Aficio MP W5100 Mono Wide Format MFP Printer Scanner. It shows ERROR J006?
Lots of information here plus Service Manuals. It is a Paper Jam or Transport issue.
https://www.google.com/search?q=AFICIO+MP+W5100+ERROR+J006The Aficio MP W5100 error J006 indicates an original document jam in the Auto Document Feeder (ADF/ARDF), specifically often caused by a transport motor failure or binding in the drive belt area.Scribd +1Immediate Troubleshooting StepsClear the Jam: Open the ADF unit cover and remove any jammed originals.Check Originals: Ensure the documents are not folded, torn, or stuck together, and are suitable for scanning (not too thick or flimsy).Check Drive Belt (Technical): If the error persists, the ADF Idler Pulleys and Shafts may need cleaning and lubrication to relieve binding.Restart/Reset: Turn the main power off and then back on to clear the error.Scribd +3If the issue continues, the ARDF drive belt or transport motor may need professional service.
Ibico 2700 laminator
I need to replace the rollers on my IBICO 2700 laminator. I will need to order the new rollers can you help?
Oce plotwave 300 error code 5703
Residual Toner Container Full or Missing. Waste toner. If you put a new waste toner container in and it is the same problem, it is the sensor. Try cleaning the sensor.
Not finding what you are looking for?
