Vector Sport Spot 1,000,000 candle power spotlight
6 Volts, here is info from site.
VEC127Y
VECTOR SPORT SPOT 1 MILLION CANDLE POWER CORDLESS-RECHARGEABLE SPOTLIGHT
-
HIGH CANDLE POWER QUARTZ HALOGEN BULB DELIVERS A BRIGHT AND TIGHT BEAM
-
AREA WORKLIGHT IN HANDLE PROVIDES UP TO 15 HOURS OF LIGHT WHEN FULLY CHARGED
-
PROVIDES CONTINUOUS SPOTLIGHT USE FOR UP TO 25 MINUTES WHEN FULLY CHARGED
-
HIGH IMPACT, BREAK RESISTANT ABS AND POLYCARBONATE HOUSING
-
TOUGH, WEATHER RESISTANT AND BUILT FOR RUGGED OUTDOOR USE
-
REPLACEABLE 6 VOLT, 6 AMP HOUR, NON-SPILLABLE, SEALED BATTERY
-
LOCKING TRIGGER FOR ON/OFF LIGHT CONTROL
-
INCLUDES AC AND DC CHARGING ADAPTERS
-
INCLUDES BUILT IN HANDS FREE WORKSTAND
How long to recharge a peak portable power system 450 plus
- Using an AC Outlet (110V):
- The system can take approximately 24-36 hours for a full recharge when connected to a standard household outlet.
- Using a DC Outlet (12V):
- When connected to a vehicle's DC outlet (cigarette lighter), the recharge time is usually longer, often around 30-36 hours.
Steps for Recharging:
- Turn Off All Outputs: Ensure that all output switches are turned off to avoid drawing power during the charging process.
- Connect to Power Source:
- For AC charging, use the supplied AC adapter and plug it into a wall outlet.
- For DC charging, use the supplied DC adapter and connect it to the vehicle's cigarette lighter outlet.
- Indicator Lights: Check the indicator lights on the unit to ensure it's charging. The light may change color or turn off when fully charged.
Battery Maintenance Tips:
- Regular Charging: To maintain the battery's health, recharge the unit every three months, even if it's not in use.
- Avoid Full Discharge: Try not to let the battery completely discharge before recharging.
Manufacturer Instructions:
For precise instructions and maintenance tips, refer to the user manual provided with the Peak Portable Power System 450 Plus. If the manual is not available, you can usually find a digital version on the manufacturer's website or contact their customer service for assistance.
Where do I get parts for my Vector 350, 200 wt veco29acy ?
To find parts for your Vector 350, 200 wt veco29acy, you have a few options:
- Manufacturer: Start by contacting the manufacturer of the Vector 350 equipment. They may offer replacement parts or direct you to authorized dealers or distributors who can provide the parts you need. You can check the manufacturer's website for contact information or support resources.
- Authorized Dealers or Distributors: Search for authorized dealers or distributors of Vector 350 equipment in your area or online. These dealers may stock replacement parts for the specific model you have and can assist you in purchasing the parts you need.
- Online Marketplaces: Explore online marketplaces such as eBay, Amazon, or specialized industrial equipment marketplaces. Sellers on these platforms may offer replacement parts for Vector 350 equipment, including the specific model you have. Be sure to verify the compatibility of the parts with your equipment before making a purchase.
- Equipment Repair Shops: Local equipment repair shops or service centers that specialize in food equipment may have access to or be able to source the parts you need. Contact them and inquire about their ability to provide replacement parts for your Vector 350 equipment.
When searching for parts, make sure to provide as much detail about your equipment, including the model number (Veco29acy) and any specific part numbers or descriptions if available. This will help ensure that you get the correct parts for your equipment.
How can I get the third battery which must leaked, from my BDL 250S?
pry it out, any way you can without damaging the tool. Damage the battery, not the tool if you have to. Spray it down with vinegar first, that might help loosen it up. When you have it out, clean up the area with vinegar on a cotton swab first, then clean the contacts with a fine sandpaper or emery board. Careful with the vinegar, don't let it go where you don't want it.
How long and how to reconditioning the battery
the battery can only be reconditioned if it is not working properly due to a scale build up on the plates of the battery, if a cell is shorted out ,it will have no effect to "recondition it" . if a battery needs to be reconditioned to work properly it is probably close to the end of its life cycle and it will be a temperary fix
Not finding what you are looking for?
