Python Cycling - Answered Questions & Fixed Issues
I need a left side crank for a BICYCLE roadmaster 700c
spare parts.ask.
Replacing the Left Crank on a Road master 700c Bicycle
- Check Your Crank
- Note the crank length (usually 170mm) and type (square taper or splined).
- Make sure it matches your bike's bottom bracket.
- Where to Buy
- Official Parts: Sears Parts Direct - genuine Road master cranks.
- Aftermarket/Generic: Amazon, eBay, Performance Bicycle, Westwood Cycle - aluminum alloy cranks that fit many bikes.
- Key Tips
- Confirm crank length and interface type before buying.
- Take your bike to a local shop if unsure about compatibility.
- Installation
- Remove the old crank and install the new one in the same way, making sure it's secure.
9/22/2025 11:31:36 AM •
Cycling
•
Answered
on Sep 22, 2025
•
20 views
Assembly instructions for 16 starburst/magna bicycle
Unpack & inspect all parts-frame, wheels, handlebars, pedals, training wheels, seat, fork, reflectors, tools.
Attach handlebars and stem-align the marking and tighten securely.
Install front wheel-fit into the fork dropouts, secure with axle nuts (or quick?release).
Attach pedals-right pedal threads clockwise, left counter?clockwise.
Mount saddle and seat post, adjusting height and tightness.
Adjust training wheels/chain guard/brakes-ensure alignment and safety.
Inflate tires to recommended pressure, test brakes, secure reflectors.
7/3/2025 9:02:07 AM •
Cycling
•
Answered
on Jul 03, 2025
•
242 views
I have a V-Max MPE Fitness Exercise bike at home,
Perhaps you have already looked, but most items that take an AC adapter have a label on them near where the adapter would be connected that specifies the input volt/amp combination that is required. Other than that, you might contact the manufacturer. I would also be unusual if there were not some sort of label somewhere on the bike that does not note the manufacturer and model. = I’m happy to help further over the phone at
https://www.6ya.com/expert/donald_f2ed37026a3ac881
1/7/2025 12:34:27 AM •
Cycling
•
Answered
on Jan 07, 2025
•
809 views
Looking for year of this frame...serial#...wl3343768
- While there isn't a universal method for reading bicycle serial numbers, some patterns are common:
- The first set of numbers often indicates the year of manufacture.
- The last few digits represent assembly and an individual ID.
- However, the easiest way to decode a bike serial number is by using a bicycle decoder specific to your brand's bikes.
The brand has not been identified in this instance. Pursue the matter on the brand's site.
5/8/2024 9:10:30 PM •
Cycling
•
Answered
on May 08, 2024
•
106 views
Tomahawk E Series Exercise bike loud peddling sound
Standard WD40 is just a 'quick fix' as it isn't an actual oil unless the can is clearly labelled as "Bike All Condition Lubricant". It'll be best to buy a proper light oil like 3in1, 151 Super oil or an actual chain lube.
This 'clickey' noise. Is it random and happening every so often or is it a constant, regular click that changes with the speed your pedalling at? Check for slack in the chain. as you wiggle the chain up and down there should only be about a centimetre of movement in the chain. If it's too slack or too tight it can make strange noises. Check the axle bolts and nuts to make sure they're not loose. Check the wheel is mounted straight. If it's turned left or right the chain will 'skip' as it's slightly missing the cog teeth on the wheel. Use the frame at the rear end of the wheel as reference and measure how far the side of the wheel is from the frame on both sides. It should be about the same both sides.
9/22/2023 12:16:04 PM •
Cycling
•
Answered
on Sep 22, 2023
•
48 views
Not finding what you are looking for?
