Need balance bar
here is the
link to where you can order online the spare parts you need for your apache ah 64 helicopter just follow thelink.The price for the balance bar is 2 dollars good luck and please accept my solution if this solves your problem ..let me know..
http://www.xheli.com/s012symaapache.html
Rc 3 channel apache helicopter how to replace
Cut the balance bar off until the pins are exposed. Use some pliers and squeeze the pin out and then put the new balance bar back on and put the pin back in.
I did it this way without the tool kit, my balance bar was already broken so it wasn't an issue to cut it. It worked for me, I am flying it right now.
How do i get the
Where did you get your new balance bar? I have the UJ415 apache and broke the black balance bar off within 10 minutes but can't find a replacement? Thanks!
I crashed my Apache onto
It sounds like your tail rotor is acting up or missing. It keeps your Helicopter from flying in circles.
http://www.start-flying.com/new%20site/heli1.htm
Heli will not climb above ground effect, battery
I also have this kind of problem with my apache. The upper propeller must spin faster thatn the lower propeller if not the heli would just spin on its tail although maximum power is achieved. The solution is to check the connection of the gears and the axle of the upper propeller which is located at the bottom of the helicopter. remove first the battery pack to see clearly the connection. try to turn the upper propeller a few turns and see if the axle, gear and the metal connector is sliding. A fixed my heli buy putting a permanent glue on the axle, connector to the gear and whalla. it does not slide. Most problems of this model is the gear of the upper propeller, often times loosened specially during crushes. This will a lot help you as your heli would have power on the upper propeller for lift off. Happy flying.
Gerry1abe.
Hi my apache bottom wings are good but top wings
Please check the connection of the axle of the upper propeller. Turn the heli upside down and spin the upper propeller manually, try to see if the gear turns if not there is a loose connection. You will find 2 small screws near the gear, unscrew one of them and push the axle then back in place, tighten the loosened screws. Turn the upper proppeller manualy, a few turns will do ansd see if the gear turns simultaneously with the propeller. If it still does not turn, apply a permanent glue to the gear and the axle. This will sure have your heli on flight.
Gerry.
Building a RC helicopter for college
You might want to get on google and search how to build Remote Control Helicopter. you will find a lot of useful info. If you have never flown a RC heli thought I
suggest you get a sim for the computer. I have been flying now for 10 years and they are not that easy to fly. I still have problems and always am learning some thing new. here is one link to look at.
http://www.angelfire.com/blues/heli_project/
How to download pictures quickly within the
Put the cursor over the picture you want to save and click the right mouse button.
In Firefox, the option you want is "save image as"
in Internet Explorer, it's "save picture as"
In the file-save dialog, be sure to pick a folder that makes sense to you -- "My Documents\My Pictures" for example -- so you know where to find the saved images.
12/24/2009 2:35:30 PM •
Apache HTTP...
•
Answered
on Dec 24, 2009
•
79 views
Want to know if there is a way to 'steer' the
you got that bit right,,, its a real hand full to get your head around its got a mind of its own at times,,, they dont like flying in any kind of a wind and all of the ""tricks"" they say this chopper can do ?? well iv never seen one do it quite right! all straring is done by motor power is the remote control working ok? as the tail rotor is what should do the steering, not the main rotor, at the end of the day its all down to how you use the power settings,, ie: big fist full of power then sudden cut off will pitch the frunt down full power will then make it turn, risky way to fly?
I have an apache 3 channel helicopter.the top
Same problem I had. There are two motors. One to spin the top blade and a second to spin the bottom. My motor was defective out of the box to spin the top blade. Very poor quality as my AH 64 had a bad circuit board. I had to take parts from one to fix the other.
Tremendous machine vibration
Make sure the "connect buckle" is connect to the correct side, and not bent in the middle, it should be straight.
If this doesn't help, new blades are sometimes different weights try to matching the weight of opposing blades you may even need to sticky tape a small weight underneath the blade to get them balance. Don't stick anything on to the top of the blade.
Not finding what you are looking for?
