Vertical Lines on the projector screen How can I fix this one for Infocus LP70+? When the vertical lines are displaying, open the projectors menu (by pushing the "menu" button). If the vertical lines ...
lp70+ display shows a solid black vertical line Lp70+ display a solid vertical black line on the right side of the screen. This line covers part of whats being displayed on screen. Lamp replaced but ...
Question about ScreenPlay 5700 Multimedia Projector
I have a infocus dlp projector it is showing thin pinstrips vertical lines across the screen it showed 998 hrs on the bulb, so I put a new bulb in after 2 hrs the lines reappeared what could this ...
vertical lines appear on screen if they are horizontal, there is a ground loop problem. plug the source and the projector into the same power strip. if they are vertical, the clock and phase are off. ...
White vertical streak There is a white vertical streak along the right side of the picture that is projected on the screen. what type of projector is it? what model?
the display changes from vertical to horizontal repeatedly. tried different settings for the auto vertical but did no good Thanks Bob go into the menu and reset the settings to factory default. if ...
vertical position I need help adjusting the vertical position of my picture. On my menu the option to move the picture up and down are grayed out and I can not access it put a signal on it then it ...
Question about Proxima DP6155 Multimedia Projector
multi color vertical lines being projected. You can see the image but there are 20-30 vertical sections of different colors even with no input cable connected. It might be for RGB LCD cable is ...
Question about Proxima DP6155 Multimedia Projector
vertical hazy lines are all that can be seen on my Vertical hazy lines are all that can be seen on my LT260 (nec) make sure the lcd cables are secure in the main board. if that doesn't fix it the ...
Question about LP120 / 1000 Lumens / XGA / DLP Projector Refurbished Multimedia Projector
sync & Vertical sync signals from the VGA source. If it finds these signals only then the source is connected. Even if the sync signals are found, the RGB switching should be working. Either there
Usually answered in minutes!
6 Questions
4 Questions