Questions & Answers for: True set javascript Freezers

...just have to change the temperature control. I recommend using a white rodgers part no. 1609-105 set the cut out to about 33 cut in at 38 or 39 you might have to set defrost time to less minutes ...

we have a true single door freezer, it is iced up inside . what should the dial inside the unit be set on. On the freezers a setting of 7 or 8 should do fine. I would be more concerned with the ...

I have a True Ref. GDM-SL-RF but when i plugged it in it wont power up. No light s or fan. The unit is brand new. Is there a switch or something that has to be removed before use. I checked the power ...

location of temperature setting site inside on the right side of the fan/coil housing. should be a black knob marked 1 - 9 the higher you set it the colder it will run. Normally set on 7 or right ...

proper defrost time true t-49f what is the factory setting for the defrost timer? They don't even ship them properly set. They expect that a trained technician is on site at start up. I generally use ...

...temp control no use a Ranco p# A12-700 make sure the capillary is in the coilto sense the temp and set it to 1.5 on the knob. any colder and it could get too cold . you may be able to set it at 2

how to set defrost timer for t19f someone has miss adjusted the timer on this freezer . how should it be set In general I use 4 defrosts in 24 hours for 30 - 40 min each.

which way do I turn the temperature dial on a true 3-door reach-in stainless steel cooler? Numbered 1-9 - one is the warmest setting, nine is the coldest. For a cooler it should be good on 5 for a ...

What is the standard defrost timer control setting Usually every 6 hours will keep the evaporator coil clear of frost. I set the time at 45 minutes per defrost. This unit has a defrost termination ...

What is the standard setting defrost timer control of ts-49f our freezer is set to defrost every 8 hours for 15 min. this seem to do the trick. we have a true t-49f reach in freezer. try this setting ...