I need the program code for a zenith tv model# h25c39y

marco amezcua

• 143 Answers
• Posted on Nov 04, 2007

SOURCE: Zenith 350

Magnavox
103, 112, 113, 117, 119, 127, 128, 130, 139, 165
Zenith
101, 142, 149, 177

RCA DSS
373, 394
Zenith Satellite
312, 328, 330, 351

SOURCE: programming

push the tv button then hold down the code search button till the light becomes solid. point the remote at your tv while it is turned on and push the channel up or down til the cannel changes. once it does push the mute key to save. so u know this works like that on all device and if you pass up the right on from pushing the button too fast you can just push the opposit direction rather than waiting for full circle. also be aware that there are multiple codes for some devices and some work better than others.

SOURCE: programming remote

The BNZ110 is designed to be for Zenith by default. If it gets changed and won't work, then take the following steps.
1. Remove the batteries.
2. Hold the power button down for 10 seconds.
3. Reinstall the batteries.

This works for many Zenith TV's.

Here are the codes for Zenith if that does not work.

713 502 606 409 710 701 507 714 405 712 015 916 008 002 115 224 324 126 326 826 228 430 632 435 437 903 407 505

SOURCE: zenith zn620 universal remote

In case anyone ends up seeing this in the future, there is an alternate way of programing devices with the Zenith Universal Remote other than just direct code entry.

It's a sort of automatic searcher, and the process goes like this:

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes
channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

SOURCE: unlock code

Is there a reset buttom that can hold in after it is turn on , you may have to hold it for a few second
Then turn it off and back on again and see what happen.