After selecting Bake and selecting a temperature, the fault code F3 comes on and the oven beeps. After pressing clear, it then goes to an F2 code.
I have a Whirlpool Gold Oven with an F3 code on. What is this code for?
Well here's the details about those codes:
F2 :-
1. The oven temp has risen above 665F and the door is not locked or
2. The temp has risen above 965F with the door locked
1. Check oven temp in mode that failure occurred. Replace EOC (Electronic Oven Control) if above limits
F3:-
Oven temperature sensor is open (above 3000 ohms)
Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor
1,021 views
Usually answered in minutes!
I have a Tappan Wall Propane Oven and when I press the Bake and set temperature to 400 degrees, the oven comes on but then I get the code F3 and it beeps. I then press cancel but then I get the F2 code and beeps. I recently had my propane tank filled by the supplier, does that have anything to do with this?
×