Error Code 0002

SOURCE: maintenance request 0002

Epson
Maintenance request 0002What is this mean?

SOURCE: hello I hae a

Its more of a fiddly job than a difficult one. Remove both end covers and drop down the tray which has the mainboard on. Loosen the tension on the carriage belt, remembering to check the belt tension on the scale before doing so, then remove the belt from the pinion of the motor. Unplug the connector for the motor from the mainboard, then undo the cable from all the various clips and pieces of tape up towards the motor. Then remove the motor and do it all again in reverse. Once its installed you will need to reset the counter to clear the error message.