Masterbuilt error code 080f - Masterbuilt Grilling

https://fireplacehubs.com/masterbuilt-smoker-error-codes/


This should help you. It has a number to call for more help.

1 means the digital thermometer is too cold. Try hitting it with a hair dryer before starting the smoker. Not sure about 4.

This information may be of some help.

READ FIRST!
Before trying any of the lengthy suggestions regarding repairs on Masterbuilt electric smokers, consider this. It APPEARS (based on testing, not reverse engineering) that Masterbuilt designed the controller on my unit (140S) to error out below a certain minimum temperature. If you are like me and have your smoker outside (as you should), but in sub freezing temperatures, you too may get this error. Just shoot the short temperature probe (on the back wall of the cabinet) with a hair dryer for a minute or two. Then plug back in for no error (assuming you do not have an actual wiring or probe failure). Just make sure to immediately start it heating before it drops too low again...

If this was by design, shame on Masterbuilt! If this was by error, shame on their engineers! If this behaviour is due to an intermittent problem with my unit, shame on me for not fully testing all possibilities once I found an easy fix...

Same problem here. Any answers yet?

Hi and welcome to FixYa, I am Kelly
It is telling you that the temp is below 40 degrees F. All you need to do is warm up the temp probe to 40F and it should work just fine. Use a hand held hair dryer or a warmed up shop vac on b.l.o.w to warm it up.

Happy New Year,
Kelly

Get to Masterbuilt Turk shop where you got the fryer and buy a new code for the replacement of the old one.

http://www.masterbuilt.com/pdf/manuals/20070407%20Manual.pdf
Dont know if it will help,Good Luck