Washes until the rinse and then SD comes on and flashes and won't spin
I AM SO SICK OF HAVING PROBLEMS WITH THIS WASHER..JUST CHANGED OUT THE ENTIRE CONTROL PANEL 6 MONTHS AGO..AND IT'S JUST ONE PROBLEM OR ANOTHER..MY SOLUTION WOULD BE TO CURB IT IF I COULD LIFT IT BY MYSELF...UGH!!!
Manual says -
"Sd" (Suds Detected)
Did you use regular detergent?
Regular or hand-washing detergents are not recommended
for this washer. Use only High Efficiency ("HE") detergent.
Did you add too much detergent?
Always measure detergent. Follow detergent manufacturer's
directions.
If excessive suds are detected, the washer will display this
code while running a suds reduction correction routine at the
end of the wash cycle. The suds reduction routine removes
extra suds and assures proper rinsing of your garments. If the
code remains and the wash cycle dial is flashing after the
recovery routine has stopped, re-select your desired cycle
using cold water. Press START. Do not add detergent.
Let me know if this helps, or you would like more information/help.
1,794 views
Usually answered in minutes!
I did try that but it still comes on
Now i also get an F code and when I reset it it keeps coming back, so i have a repair guy coming in tomorrow. wonder what that will cost.
just F
I have the same SD error code and wont spin, what is the deal about that, can you help me since someone came out to look at yours? thank you christi
also i ran with cold water, and no clothes and it still says SD, and there is water still in bottom of tub please help me with this can't afford someone to come out at this time.
sd and f keep coming on
×